NITELIGHTER SWIMMING POOL LIGHT - for Above Ground Pools

TESTED TO UL STANDARD 676 AND ETL CERTIFIED POOL LIGHT by SMARTPOOL

Create a warm glow in your above ground pool with the Nitelighter Ultra underwater pool light. Fits easily on any above-ground pool and installs in minutes with no need for pool draining. The halogen bulb has a lighting mode of 50W and also features a three hour auto shut-off with on/off override control.

Safe and easy to install without dropping your water level, removing wall fittings or tying up your return line. Includes a long-life halogen bulb, stainless steel mounting bracket, and 28’ of cord. Secure the Nite Lighter to the top rail of your aboveground pool and plug it in to any nearby outlet. The NiteLighter Ultra will illuminate any size above ground pool. Add the Nitelighter Ultra Pool light to your pool!

Newly redesigned for maximum illumination!

NA410

Nitelighter Ultra Above-Ground Pool Light - 12 Volt / 50 Watt

NL100

Nitelighter Ultra Above-Ground Pool Light - 12 Volt / 100 Watt

NLK3

Order No.

Description

Price

NLMC

DELUXE AQUA LUMINATOR™ ABOVE-GROUND POOL LIGHT

ADVANCED HYDRO-OPTIC TECHNOLOGY
IS UP TO 200% BRIGHTER THAN OTHER POOL LIGHTS

The deluxe Aqua Luminator™ installs directly into any return fitting. No holes to cut or reseal. Its directional water flow feature replaces your current return fitting and insures proper circulation. Bathe your pool in bright light or change the mood with the red or blue lenses that are included. Not only is this light bright, it safely runs on 12-volts and meets all UL and CSA standards. Aqua Luminator™ is easy to install and comes complete with a 3,000-hour bulb, vented return fitting, pre-wired transformer with on/off switch, blue and red colored lenses, 25’ cord, and an installation manual. 1-Year Warranty. Add the optional pool fountain for a beautiful illuminated water show.

NA404

69100000

COLOR AQUA LUMINATOR™

ADD THE DRAMATIC EFFECTS OF
LED TECHNOLOGY FOR A DRAMATIC LIGHTING EFFECT

The new CAL Aqua Luminator™ has the same great features of the original Aqua Luminator™. It features an extra-bright lighting source and is easily installed in any existing return line. The Aqua-CAL runs on super safe 12-volts and can be installed in 10 minutes or less. The CAL combines Hydro Optics with LED technology to create revolutionary color-changing mood lighting for your above-ground pool. With the flip of a switch create brilliant, dramatic colors for your pool.

Set the evening's mood with a selected color or roll through the colors of the spectrum at four different settings, or flip to an exotic blue-green-blue transition. It will add a new dimension to your summer evenings and parties.

Comes complete with LED light, vented return fitting, pre-wired transformer with color switch, 25' of cord and an installation manual. Add the new CAL Aqua Luminator™ to your pool this season and create dramatic mood setting colors. 1-Year Warranty.

The upgrade CAL kit allows you to add the LED system to the original Aqua Luminator™.

NA406

ADD A CASCADE OF BEAUTIFUL LIGHT TO YOUR POOL THIS SUMMER

This new Aurora™ color changing light installs directly into your pools return line so there are no holes to cut or reseal. The

 Aurora™ replaces the current return to insure proper water

filtration with its directional flow water jet. It installs easily in 10 minutes or less on any new or existing above ground pool. With a flip of a switch your pool is bathed in white, blue, green, pink or turquoise light. The Aurora™ can be set on any light in its color spectrum or it can cycle

 through the entire spectrum for a “party effect”. Its

bright LED lights will last over 100,000 hours and its low 12 volts is completely safe. The unit comes complete with light, transformers with color switch, 25’ of cord and installation manual. ETL listed. Backed by a 1 year

warranty.

AQUALUMIN II Nicheless In Ground Pool Light

Add brilliant illumination to your pool or spa with the AQUALUMIN II light. The unique, nicheless mounting system makes it perfect for vinyl-liner and concrete pools. AQUALUMIN II's revolutionary, patented design uses a mounting hub and bracket instead of a niche. That eliminates the need for prepunched light panels, costly makeup panels, and extra braces. To create a different mood, simply snap on a colored lens for soft, radiant lighting.
Additional features include:

NOTE: All 120 volt pool and spa lights must be connected to a branch circuit protected by a ground fault circuit interrupter (GFCI)

Energy-efficient, bright white halogen quartz lamp with clear tempered glass lens
Optional snap-on colored lenses
Heat-sensing low water cut-off device for safety
Easy installation in vinyl liner or concrete pools and spas
Wall hugging fit for an attractive installation
Can be installed in pools with 6-foot radius walls or larger
New cord sealing material eliminates potential for leakage.
Highly polished stainless steel face ring is attractive and corrosion-resistant.
Easy to service
12-volt and 120-volt models
One year limited warranty

78863400

250 watt,120 volt,50ft cord

78887800

Mounting Bracket Vinyl liner, 1in hub

78886000

Retrofit kit for AqualLumin II

AMERLITE Underwater Pool Lights for In Ground Pools

Enhance your pool's beauty with the world's most reliable,
most popular, underwater incandescent lighting. The American Products Amerlite

AMERLITE lights have been the world standard of reliability for underwater pool and spa lighting for over 40 years. It features a stainless steel shell, 8-3/8 in. prismatic tempered glass lens, and stainless steel face ring with uni-tension clamp. AMERLITE is expertly engineered to stand up to moisture, corrosion, and impact, and to provide optimum performance and safety for years to come.

NOTE: All 120 volt pool and spa lights must be connected to a branch circuit protected by a ground fault circuit interrupter (GFCI)

 

World standard of reliability
Stainless steel face ring with uni-tension clamp
Superior light diffusion
Prismatic tempered lens
Gold diffused low water cutoff

The Workhorse Of The Industry.  The original Swimquip Pool Light. Millions installed all over the world, The Sta-Rite fits most old Anthony pools underwater lights. Light measures 8-1/2" outside dimensions.  (1960-1990)

Available in 12 volts or 120 volts with your choice of cord lengths. Utilizes a heavy copper shell, Hi-Impact Lens w/ prisms and UL and C.U.L. listed for swimming pool applications.

Spectrum Amerlite (SAm) Underwater Lights for Swimming Pools and Spas

The Spectrum Amerlite (SAm) is the world's first submersible color light for swimming pools and spas. The Spectrum Amerlite delivers a nearly infinite palette of brilliant water colors. Custom mix a color to match the evening's mood or let SAm slowly waltz your customer's pool from color to dazzling color. With twin 4,000 hour tungsten halogen bulbs, SAm delivers white light comparable to the 300W Amerlite you have relied on for decades. SAm color synchronizes with other SAms, SALs and with the FIBER works PG2000."Auto-color-roll" and swimming colors effects are available when used in combination with the new Pentair IntelliTouch systems.

                                    

Swimming colors available when used with IntelliTouch system
Auto-color-roll with IntelliTouch Synchronizes with PG2000
UL Listed in full-size Pentair Pool Products/PacFab/American/Purex niches
Brilliant colors
Exclusive Spectrum Color Roll
Hold on custom color
Controlled by a single switch
White light equivalent of 300W Amerlite
4,000 hour halogen bulb life
Simple 3-wire connection
Color synchronization standard
Great for new installations and for replacement of any Pentair Pool Products pool light
 

Intermatic 12V Pool Light Transformers

Specifications – PX100 & PX300
ENCLOSURES– 7-1/4" (19.4 cm) high x 5-1/4" (13.3 cm) wide
x 4-1/2" (11.4 cm) deep. Steel with electro statically
applied light beige finish. Mounting brackets top and bottom.
KNOCKOUTS – Total of eight 1/2"-3/4" combination.
(4) bottom, (2) right side, (1) left side, (1) back.
ELECTRICAL RATING– 120V 1 Amp input / 12-13V output
SHIPPING WEIGHT – 7 pounds
AGENCY APPROVAL – C/US

COLORSPLASH L.E.D.  REPLACEMENT POOL LIGHT BULBS

COLOR SPLASH Replacement Multi-Color LED In-Ground Pool & Spa Lights
offer a variety of lighting modes that instantly transform your customer’s pool and spa
area into a color-rich paradise. The Edison base allows Color Splash lights to install
easily and replace existing halogen or incandescent light bulbs. Uses 90% less electricity than a standard pool light, so they're less expensive for you to operate. Color Splash's proprietary cooling system insures the maximum
lifespan of any light currently available on the market, with up to 100,000 hours of
maintenance-free use and enjoyment. CREATE the perfect mood and ambience. You will enjoy seven solid colors, multiple color blends, and five light shows. Selecting the perfect lighting mode is easily accomplished using the pool or spa light switch. Plus, you can rest assured knowing Color Splash is ETL listed and backed with a five-year warranty. EMPOWER yourself with choice. Give your guests the ultimate pool and spa lighting experience. Easy to operate. Synchronizing.

Install multiple lights to transform the entire pool and spa area. 5-year warranty.

TECHNICAL SPECIFICATIONS:

-Pool Light

*Spa Light
Front Diameter:

-6.69 Inch (170mm)

*3.07 Inch (78mm)
Depth:

-4.93 Inch (125.22mm)

*2.41 Inch (61.15mm)
Power Consumption:

-35.3W

*12W

Click for larger image

"Light Wedge" Secures Any Light That Is Missing Screws or Screw Holes

The Light Wedge Holds Pool Light In Niche When Niche tab is Stripped Or Broken

• Fits All Pool Lights.
• The light wedge is inexpensive.
• Easy To Use. Installs in 5 Minutes.
• Long Lasting. Corrosion Resistant Polypropylene With A Stainless Steel Screw.

O4106

Light Wedge

$19.95